My Mac Won’t turn on or charge – if this is what you are searching right now then your search ends here. Follow these 9 points in order to solve your Mac issues. I try these 9 steps whenever My Mac Won’t turn on or charge.
Why my Mac Won’t turn on or charge:
Mac’s are not exceptional for the software and hardware problems. Sometimes, Mac doesn’t respond for the power button or Mac OS X may fail to start. In this article, I am giving you some information to fix your Mac when it won’t charge or turn on.
1. Check Mac’s power connection if it doesn’t charge:
Firstly, Check the power connection that the Mac is plugged in correctly and swap the charger or power cable using different power outlets. Sometimes, the charger itself may be damaged. If your friends have the same Mac charger then try to charge with that cable. If it works then you need to buy a new power cable(don’t use third party power cables). While using MacBook be sure that the battery isn’t completely dead and if it needs keep the charging for some time and after a while try to boot the laptop.
2. Check the hardware connections:
Check that all the cables are connected correctly. If you’re using Mac mini check the video-out cable is connected correctly to both the Mac mini and display.
Disconnect all peripheral devices which may be a cause for the problem and try to boot your Mac.
Power-cycle means forcing your Mac to restart. For the Macbook you need to hold the power button for ten seconds to forcibly cut the power and wait for ten seconds to restart it. For the Mac desktop, you need to disconnect the power cable and after ten seconds try to restart the Mac.
4. Run your Mac in Safe Boot:
During start up, Safe Boot limits the functionality of your Mac and perform certain diagnostics. In some rare cases, the Mac will start up successfully with the Safe Boot.
5. Check your Macs File System:
Turn off your Mac and start it by holding the Command+S buttons to launch your Mac in Single-user Mode. when the black screen with messages appears to release the keys.
The Command-line prompt appears and after all the text scrolls down, type fsck-fy and click return. Wait for several minutes, after completion of five different checks, you will get messages like “The Volume appears to be OK” or “File system was modified”. If you get first message, type reboot and click on return button.
If this isn’t helpful to start up your Mac, then move to the next steps.
5. Resetting the NVRAM of your Mac:
NVRAM is the special memory on your Mac, that stores data even the Mac is turned off. Resetting the data in NVRAM isn’t harmful, but it is useful. To reset the NVRAM you have to keep hold the keys: Command, Option, R and P, and turn on your Mac until your Mac restarts. After this step, your Mac will start normally. In some cases, you get to see a progress bar on startup. if it fills up, then the Mac starts up. In some cases, the Mac shutdown at half of progress bar.
6. Run the Disk Utility:
When you have a corrupted drive, the operating system doesn’t load. Then you have to run Disk utility into Mac OS(OS X) recovery mode to fix the problem. Turn off the Mac and while your Mac booting up keep pressing Command + R.
When your Mac opens in recovery mode then you can access the utilities of OS X.
-Select ‘Disk Utility’ and click the ‘Mac’s drive’ icon.
-Select ‘Verify Disk’ option, then the errors are found by the disk utility and ask to repair.
-By clicking the Repair Disk you can repair the errors.
7. Reset the SMC Firmware on your Mac:
The last thing you should try when your Mac isn’t responding to power buttons is resetting the SMC(System Management Controller) Firmware. we can reset the SMC Firmware with the following instructions.
-If you are using modern MacBook which has a non-removable battery, connect the power cable and press shift+control+left side option keys+Power button. At the same time, release all the 4 buttons and then click the power button of Mac to turn it on.
-If you’re using MacBook with a removable battery, disconnect the power cable and remove the battery from it. Hold the power button for five seconds and release it. Insert the battery and press the power button of Mac to turn it on. It solves my issue whenever My Mac Won’t turn on or charge
-If you’re using Mac Desktop, Disconnect the power cable and leave it for 20 seconds. After plug-in, the power cable and wait for five more seconds, and then press the Power button on your Mac to turn it on.
8. Reinstalling the Mac OS X:
Sometimes, by reinstalling the Mac OS X, you can start up your Mac. You can install new Mac OS X by selecting Reinstall OS X from the recovery mode options.
Also Read about: One plus 5 price
9. Book an apple store appointment:
If you’re unable to make the Mac started. Then you have to take an appointment in Apple Genius Bar to take their help.
Whenever my mac won’t start or charge I follow these nine steps and solve the issue. I hope you may find this useful in case of your Mac won’t start or charge. Thank you sharing is caring.